REFLOW CHECKER MEMORY UNIT(PLUS α O2 CONCENTRATION MONITOR RCM-O
REFLOW CHECKER MEMORY UNIT
(PLUS α O2 CONCENTRATION MONITOR RCM-O）
- ● Measure the oxygen concentration profile in the furnace.
●Oxygen concentration at the most important substrate position can be measured.
Oxygen concentration at substrate position
Oxygen concentration profile
|Max. measuring time||Ni-MH battery: Approx. 40min.|
|Sampling time||0.05sec. 0.1sec. 0.2sec. 0.5sec. 1.0sec. 2.0sec. 4.0sec. 8.0sec.|
|Arbitrary setup possible (synchronized to RCM-S memory unit)|
|Oxygen||Measurement principle||Zirconia limiting current method|
|Power supply||Supplied from RCM-S Memory unit|
|Ni-MH battery (AAA battery x 3)|
|Outer dimensions||65(W)×383(D)×25(H)（㎜） Excluding projections|
|Weight||Approx. 950g (including battery, tray is not included)|
- * The maximum measuring time is a time in which heat resistance is not considered, and it cannot be measured
in the reflow oven.
- * Manganese batteries and alkaline batteries are not available.
- * Lithium-ion secondary battery or AAA battery is selectable at the time of order.
- * The above specifications are subject to change without notice.
|Power supply||100V～240V AC, (approx. 15W) 50/60Hz|
|Fan||Square 120 mm (2.9 m3 /min. Max.) 2 pcs.|
|Input gas||Rc 1/8 screw connection Air 0.5Mpa following|
|Outer dimensions||350(W)×240(D)×160(H) (㎜)|