DISCONTINUED
REFLOW SIMULATOR AND WARPAGE MEASUREMENT SYSTEM(SRS-2)
Usage
Observe and measure the curving and warping of electronic parts and boards due to thermal stress, using actual reflow conditions.
Feature
- ●Measure the warping of a part or board due to heat.
- ●A laser on the underside measures the displacement in both X and Y-axis directions.
- ●Dedicated software analyzes the displacement measurement data.
product specification
Item | Specification |
Model Name | SRS-2 |
Applicable Circuit Board | Up to 70W x 70L x 10H mm |
Outer Dimension | 652(W)×411(D)×425(H)(mm) |
Heating Method | Upper-face : Extreme infrared radiation with hot air
Lower-face : Extreme infrared radiation |
Cooling Method | Flowing air or N2 air (with flow adjustable valve) |
Power Supply | 200V 50/60Hz 1.6kVA 3Phase |
Air | 0.3 - 0.5MPa 100 liter/min (Maximum) |
O2 Concentration in Furnace (when using N2) | 100ppm minimum |
PCB Installation | Flat plate system (heat resistant glass or ceramic coated plate) |
Upper-Heater | Hot air heater : Approx. 675W (Approx.75W x 3 x 2lines+Approx.225W x 1) * Deviation to the standard nozzle can be set. Extreme infrared radiation heater : Approx. 360W |
Lower-Heater | Extreme infrared radiation heater : Approx. 360W |
Temp. Accuracy | 5C maximum (Maximum range : 50(W) x 50(L)mm in the center) |
Measuring Temp. Range | Room temp. - 330C |
Measuring Points | 3points |
N2 Gas Supply Function | 100 liter/min. with flow regulating valve during operation. |
Weight | Approx. 50kg |
【Main Functions Secifications】
Item | Specification |
Displacement | A laser displacement measuring sensor reads warpage from below the sample. |
Measuring Range | X and Y-axis : Max 70mm
Z : Reference point 0 - 3mm |
Resolution (Warpage Measurement System) | Max 0.2μm |
Laser X-Y Movement Speed | Max 45mm/s (without acceleration and deceleration) |
Measurement Points | Up to 19 |
- Option : N2 FLOW MIXING METER
- * The above specifications are subject to change without notice.