DISCONTINUED
SOLDER IMPURITY CHECKER(STA-2)
Usage
Feature
- ●Necessity for on-site lead-free solder management.
- ●Applicable for RoHS Directive.
(WEEE: Directional on Waste from Electrical and Electronic Equipment, Pb mixed rate under 0.1%) - ●Lead measurement accuracy is +/-150 PPM.
- ●Manage increases and decreases of Pb and Cu in your lead-free solder.
product specification
Item | Specification | |
Model Name | STA-2 | |
High Performance Mode | Normal Mode | |
Analysis Method | Heat-up analysis | |
Sample Size | Approx. 14g | |
Pb Measurement | 0% - 0.1% | 0% - 0.5% |
Measurement Accuracy (Pb) | ±0.015% | ±0.075% |
Cu Measurment | 0.3% - 0.9% | |
Measurement Accuracy (Cu) | ±0.1%(Not accurate at 0.7% and above) | |
Measurement Time | Approx. 40 min. | |
Sample Measurement Temperature Range | 170C - 280C | |
Sampling Measurement Temperature Accuracy | ±1.5C within measurement range | |
Max. Heater Temp | 290C | |
Power Supply | AC100V,220V(specify when orderring) 200W | |
Weight | Main unit: about 4.5kg Heating unit: about 1.3kg |
- * When registering the standard data, High Performance mode and Normal mode switch automatically.
(Lower standard data, High Performance mode: Under Pb 0.3%, Normal mode: Pb 0.3% or more.) - * Measurement range and Measurement accuracy is applicable when Sn-3.0 Ag-0.5 Cu was used.
- * The above specifications are subject to change without notice.