DISCONTINUED

DIP TESTER(DS-03)

Usage

The Dip Tester enables you to set up and maintain the flow soldering equipment easily and accurately. This has been developed with using the latest technology and expertise in soldering equipmet.

Feature

  • ●Obtain various data such as Temp, Time and etc. on soldering performance in one stroke.
  • ●Preheat temperature (temperature on underside of the board caused by preheaters.)
  • ●Soldering temperature of the 1st soldering tank
  • ●Dip time of the 1st soldering tank
  • ●Soldering temperature of the 2nd soldering tank
  • ●Dip time of the 2nd soldering tank
  • ●Confirmation of flux height, solder height and flux dryness
  • ●Total dip time of the 1st and 2nd soldering tanks

product specification

 

Item Specification
Model Name DS-03
Cold contact point compensation Automatic compensation with platinum temperature measuring resistor
Ambient temperature 5 minutes or less OK at ambient 120C
Battery to use S-006P 9VDC, 1 piece
Usable time More than 10 continuous hours
Life of sensor mounting plate More than 5,000 times at soldering temperature 250C and dip time 5 sec.
Outer Dimension 94W x 230D x 51H mm
Weight 840g (without battery)

Item Sensor Display method Measuring range Accuracy/Contents
Soldering Temperature K sheath thermocouple Digital LCD 3-digit 0 - 300C +/-2C
Temperature on the underside of board K thermocouple 50 - 300C +/-2C
Dip time Electrode 0 - 10.0sec +/-0.2sec
Flux Dryness Electrode (resistance) LED
(NG--red, OK--green)
10KΩ - 5MΩ 2Φ electrode intervals of 4mm
Flux Height Electrode With reference to underside of board 0 - 6mm Scale resolution 1mm
Solder Height Electrode
  • * The above specifications are subject to change without notice.